Features

Everything MemeCAD does today, in detail, and who gets the most out of it. Everything below is free during early access.

Who is MemeCAD right for?

People who draw to build, install, quote and get permits – 2D plans first, counted and printed without extra tools.

Room corner with sockets, a data outlet, a switch wired to a ceiling light, and a quantities list with a priced total

Electrical, plumbing & HVAC contractors

Lay out fittings on a floor plan, get counts per room and lengths per circuit, and price the job from the drawing.

A hatched living-room floor selected at 26.00 m², next to the exported quantities spreadsheet

Builders, renovators & estimators

Measure areas, walls and lengths from the architect's DWG and export the bill of quantities to your spreadsheet.

Kitchen plan with an L-shaped counter, hob, sink, tall unit and dining table, dimensioned

Interior, kitchen & bathroom designers

Scaled 2D plans with doors, windows, sanitary ware and furniture symbols, dimensioned and plotted to a clean PDF.

A stack of three sheets with a viewport, title block and a three-page PDF

Architects producing permit sets

Sheets with a scaled viewport, title block fields, lineweights per layer and a multi-page PDF of the whole set.

A DWG file opened as a floor plan with a revision cloud and a measured distance

Facility managers, landlords & surveyors

View, measure, mark up and print existing DWG and DXF files without installing anything.

A laser-cut plate with a polar array of holes, ready to export as DXF

Makers

Draw parts to size and export DXF for laser cutters and CNC routers.

A filleted corner and a trimmed line above the command history for L, TR and F

Students & hobbyists

Learn real CAD commands and drafting conventions in a tool that is free and runs in any browser.

The checklist

Everything that is included today. Each item is explained in the sections below.

FeatureIncluded
General
Runs in a browser, nothing to install✓ Chrome, Edge, Firefox, Safari on any operating system
Price✓ Free during early access, every feature included
Open source, self-hostable✓ GPL-3.0, with Docker, Railway and Vercel configurations
Files
Open DWG✓ R13 – 2018, in the browser
Save DWG✓ through the companion server
Open and save DXF✓ R12 – 2018 in, DXF 2000 with layouts out (R12 optional)
PDF to scale✓ vector, searchable text, one page per sheet
Bill of quantities✓ CSV export or a schedule table in the drawing
Drawing
Line, polyline, rectangle, polygon, circle, arc, ellipse✓
Hatches with islands and pick-inside✓ solid fill, 14 patterns, custom patterns from files
Text in any script✓ single-line text; multi-line text from files imported line by line
Symbols (blocks) with attributes✓ built-in library plus your own, with price, unit and category
Walls and rooms✓ walls with thickness, rooms labelled with name and area
Modify
Move, copy, rotate, scale, mirror, offset✓
Trim, extend, fillet, chamfer✓ exact intersections, polylines with arcs
Array, stretch, join, break, explode✓ rectangular and polar arrays
Grips, properties panel, match properties, quick select✓
Precision
Object snaps✓ endpoint, midpoint, centre, quadrant, intersection, perpendicular, tangent, insertion, nearest
Ortho, polar tracking, grid snap✓ F8, F10, F9
Typed coordinates and distances✓ x,y, @dx,dy, @len<angle, direct distance entry
Measure✓ distance, area, coordinates, full property listing
Annotation
Dimensions✓ aligned, linear, radius, diameter, configurable precision, text overrides
Layers✓ colour, hide, lock, rename, delete; current layer in the toolbar
Linetypes✓ nine ISO patterns per layer or object, global scale, drawn in the menus
Lineweights✓ 24 pen widths per layer or object, on screen and in the PDF
Colours✓ by layer, 255-colour index or any true colour; colour, grayscale or monochrome plots
Sheets and title blocks✓ any number of sheets, scaled viewport, built-in ISO title strip or your own block, multi-page PDF
Quantities
Counts and prices✓ every symbol instance, including nested ones, with editable unit prices and totals
Per room✓ area, perimeter and the count of each symbol inside
Lengths, walls, areas✓ per layer, per pattern: cables, pipes, wall surfaces and volumes, floors and finishes
Cloud
Autosave✓ seconds after each edit, with offline catch-up
Version history✓ checksummed revisions you can restore
Drawing tabs across devices✓ open the same drawings on any computer
Non-Latin text✓ Cyrillic, Greek, CJK and more, from old files through to the PDF

MemeCAD is a 2D drafting tool: 3D modelling, external references and scripting are outside its scope.

Draw

A polyline with an arc segment, a rectangle and a hexagon inscribed in a circle

Lines & polylines

L, PL with close/undo, REC, POL (any number of sides, inscribed or circumscribed). Polylines keep arc segments (bulges) and widths from imported files.

A circle by centre and radius, an arc through three points and an ellipse by its axes

Circles, arcs, ellipses

C by centre and radius or typed value, A through three points, EL by axis endpoints or centre.

Solid, ANSI31, NET, BRICK, HONEY and EARTH hatch swatches, and a hatch that leaves out three islands

Hatches

H: click inside any closed area – islands are detected automatically – or hatch a selection. Solid fill and ANSI31/32/33/37, NET, BRICK, CROSS, DOTS, INSUL, STEEL, EARTH, HONEY patterns with angle and scale. Custom patterns from DWG files are kept.

The same title in Latin, Cyrillic, Greek, Japanese and Korean, plus rotated text

Text

T single-line text with height, rotation and alignment; MTEXT from files is imported line by line. Any Unicode script.

A room drawn with thick walls and labelled with its area, and a 200 mm wall being drawn

Building tools

W draws walls with real thickness, ROOM draws a closed outline and labels it with its name and area.

Twelve library symbols: sockets, switch, light, data, smoke detector, WC, basin, shower, door, window and radiator

Symbols (blocks)

A library of electrical, plumbing, architecture and HVAC symbols, plus B to turn any selection into your own countable symbol with category, unit and price. Attributes per instance (CIRCUIT, ROOM…).

Modify

A flag shape copied, rotated by 30° and mirrored about a line

Move, copy, rotate, scale, mirror

M, CO (multiple), RO (angle by point or value), SC, MI – text stays readable after mirroring.

Lines trimmed back to a cutting edge, and a line extended to a boundary

Trim & extend

TR and EX with exact line/arc/circle intersections. Pick cutting edges or press Enter to use everything. Works on polylines with arc segments and turns circles into arcs.

A rounded fillet corner, a chamfered corner and a polyline with every corner filleted

Fillet & chamfer

F with any radius (0 makes a sharp corner and extends short lines), fillet all corners of a polyline at once; CHA with two distances.

Parallel offsets of a curved polyline, a polar array of circles and a rectangular array

Offset, array, stretch

O parallel copies of lines, arcs, circles and polylines; AR rectangular or polar arrays; S crossing-window stretch that moves only the vertices inside the window.

Three separate segments joined into one polyline, and a line broken with a gap

Join, break, explode

J chains lines and arcs into one polyline, BR removes a piece or splits at a point, X explodes blocks, polylines, dimensions and hatches.

A selected polyline with blue grips, one being dragged, next to its properties

Grips, properties, match

Drag the blue grips of any selected object. Edit every property in the panel. MA copies layer, colour, linetype, text height, hatch pattern between objects. QSE selects by type, layer, symbol, colour or text.

Precision

Endpoint, midpoint, intersection, centre and quadrant snap markers on a line and a circle

Object snaps

Endpoint, midpoint, centre, quadrant, intersection, perpendicular, tangent, insertion point and nearest, each switchable, F3 toggles them all. Grid snap (F9) follows the visible grid.

A line tracked at 45° with the polar readout, and the ortho, polar and snap toggles

Ortho & polar tracking

F8 locks to the axes; F10 snaps the cursor to any multiple of the polar angle (45° by default).

A line drawn with @3600<30 typed at the cursor and on the command line

Typed input

x,y, @dx,dy, @length<angle, or just a length while pointing. Options like Close, Undo, Radius are typed on the command line.

An area of 26.00 m² with its perimeter, and a measured distance with its angle

Measure

DI distance and angle, AA area and perimeter, ID coordinates, LI lists every property of the selection. Selected objects show their total length and area in the panel.

Annotate

Linear, vertical and aligned dimensions on a shape, and a diameter dimension on a circle

Dimensions

Aligned (DIM), linear horizontal/vertical (DLI), radius (DRA) and diameter (DDI) with architectural ticks, configurable decimals and text overrides (<> keeps the measurement).

The layer list with visibility, lock, colour and linetype per layer

Layers

Create, rename, recolour, hide, lock and delete layers. Current layer, colour and linetype in the toolbar; change the selection's layer in one click.

Continuous, dashed, hidden, center, dash-dot, phantom and dot linetypes beside lineweights from 0.13 to 1.40 mm

Linetypes & lineweights

Continuous, Dashed, Hidden, Center, Dashdot, Dot, Phantom, Border, Divide – the ISO definitions – per layer or per object, with a global LTSCALE. Standard pen widths (0.00–2.11 mm) per layer or object, shown on screen (LW) and used in the PDF.

The 255-colour index palette with the standard colours and greys

Colours

ByLayer, the standard 255-colour index or any true colour. Plots as colour, grayscale or monochrome.

Files

DWG and DXF files open in MemeCAD in the browser; drawings save as DXF or DWG, plot to PDF and export quantities as CSV
FormatOpenSave
DWG R13 – 2018In the browser (LibreDWG/WebAssembly)Through the companion server (ODA File Converter or LibreDWG)
DXF R12 – 2018In the browser, any Windows codepage or UTF-8; layouts become sheetsDXF 2000 with lineweights, hatches and layouts (R12 optional) – opens in every major CAD package
PDF–Vector, to scale, one page per sheet with title block and pen weights, searchable text with embedded font
CSV bill of quantities–Opens in Excel, Google Sheets, LibreOffice

Imported: LINE, LWPOLYLINE/POLYLINE, CIRCLE, ARC, ELLIPSE, SPLINE, TEXT, MTEXT, INSERT with attributes and arrays, DIMENSION (aligned, linear, radius, diameter), LEADER, SOLID/3DFACE, HATCH. Skipped and reported: images, 3D solids, tables, viewports.

Quantity take-off

Four highlighted sockets next to the symbols table with quantities, prices and a total

Counts & prices

Every symbol instance is counted – including symbols nested in other blocks – with editable unit prices, cost per line and a grand total. Click a row to highlight every instance.

Rooms labelled with name and area, with the symbols counted inside each

Per room

Closed polylines on ROOM/SPACE/ZONE layers become rooms named by the text inside them, with area, perimeter and the count of each symbol inside.

Cable and pipe runs with their lengths, a wall with length, surface and volume, and a hatched floor area

Lengths, walls, areas

Line lengths per layer for cables, pipes and ducts; wall length, surface and volume; hatched areas per layer and pattern for flooring, tiles and paint.

A schedule table placed in the drawing and the same quantities exported as CSV

Export

CSV for your spreadsheet, or place the schedule as a table in the drawing. Take-off data travels in the DXF as block attributes, so other CAD tools can read it too.

Sheets & title blocks

A sheet with a viewport at 1:100 and the list of standard scales

Sheets (layouts)

Any number of sheets per drawing, each a paper size with a viewport at a fixed scale. Drag the frame over the plan; it snaps to standard scales. Sheets are saved with the drawing and exported as DXF layouts.

The ISO title strip with project, title, client, date, scale, revision and sheet number

Title block

A built-in ISO title strip with project, title, client, drawn/checked, date, scale, revision and sheet number – the last three filled in automatically – or your own block with {PROJECT}-style placeholders.

Three sheets combined into one three-page PDF

Plan set to PDF

Export one sheet or the whole set as a single multi-page PDF, with lineweights as pen widths.

Cloud

The Saved, Saving and Offline states of the save indicator

Autosave

Saves about two seconds after each edit and never more than fifteen seconds later; the toolbar shows Saved / Saving / Offline. Edits made offline upload when you're back.

A timeline of saved versions thinning out from the last 10 to one a week, with Restore

Version history

Every save is a checksummed revision. Keep the last 10, one per 10 minutes for a day, one per day for a month, one per week after that. Restore any of them.

The same drawing tabs open on a laptop and an office computer

Tabs & devices

Drawings open in tabs. Switch computers and the newest version is there. Trash with "delete forever".

Try it now

No download, no licence key, no trial clock.

Open the app